Yuyao Zhongfa Engineering Plastics CO.,LTD
Add:50#,Shunchuang Road,Yuyao,Zhejiang.(Yangming Science and Technology Industrial Estate)
Postcode:315400
Tel: 0574-62700008
E-mail£ºzf@zhongfa-china.com
Conductive PP basically keeps the general properties, and also it offers good conductivity, weather and thermooxidizing resistance.
Conductive PP is used for antistatic and conductive electronic products.
| Name | Conductive PP | ||||
| Properties | Unit | Test Method | DD2(1¡Á102) | DD4(1¡Á104) | DD6(1¡Á106) |
| Density | g/cm3 | GB1033 | 1.02 | 1.01 | 1.00 |
| Molding Shrinkage | % | GB1404 | 1.2¡«1.5 | 1.2¡«1.5 | 1.2¡«1.5 |
| Melt Index | g/10min | GB3682 | 3.0 | 4.0 | 5.0 |
| Heat deflection temperature | ¡æ | GB1634 | 145 | 135 | 125 |
| Tensile Strength | Mpa | GB1040 | 35 | 30 | 27 |
| Breaking elongation | % | GB1040 | 12 | 25 | 30 |
| Flexural Modulus | 1450 | 1400 | 1350 | ||
| Flexural Strength | Mpa | GB9341 | 40 | 38 | 36 |
| Notched Charpy Impact Strength | Kj/©O | GB1043 | 3.0 | 3.5 | 4.0 |
| Surface resistivity | ¦¸.cm | 102 | 104 | 106 | |
| Volume resistivity | ¦¸.cm | 102 | 104 | 106 | |
The details given in this data sheet are our laboratory data but not specification guaranteed.
Conductive PP processing conditions,injection temperature 195~225¡æ, mold temperature 45-80 ¡æ,injection pressure 60-90MPa, eliminate moisture at 90-95 ¡æ for 2-3 hours.