Yuyao Zhongfa Engineering Plastics CO.,LTD
Add:50#,Shunchuang Road,Yuyao,Zhejiang.(Yangming Science and Technology Industrial Estate)
Postcode:315400
Tel: 0574-62700008
E-mail£ºzf@zhongfa-china.com
Rinforced POM offers good mechanical properties,heat resistance,excellent resistance to creep,anti-abrasion,good dimensional stability,good flow and processibiliy
Reinforced POM is used for gear,valve body,pressure vessel,mechanical shells,precision instrument parts,automobile parts,such as door lock, automatic,heater control unit,etc
Properties | Test Method | Unit | Reinforced POM | Reinforced POM |
POM GR-20 | POM GR-30 | |||
Density | D792 | g/cm3 | 1.50 | 1.62 |
Tensile Strength | D638 | MPa | 60 | 78 |
Tensile Elongations | D638 | % | 10 | 4 |
Flexural Strength | D790 | MPa | 100 | 124 |
Flexural Modulus | D790 | MPa | 4000 | 6300 |
Notched Charpy Impact Strength | D256 | KJ/m2 | 4.5 | 6.0 |
Heat Deflection Temperature 1.82MPa | D648 | ¡æ | 155 | 180 |
Filling content | % | 20 | 30 | |
Molding Shrinkage | D955 | % | 1.6 | 1.2 |
NOTE | GF20% | GF30% |
The details given in this data sheet are our laboratory data but not specification guaranteed.
Reinforced POM processing conditions: injection temperature 170-195¡æ, mold temperature 45-80¡æ, injection pressure 60-100MPa, eliminate moisture at 80-85¡æ for 1-3 hours.