Yuyao Zhongfa Engineering Plastics CO.,LTD
Add:50#,Shunchuang Road,Yuyao,Zhejiang.(Yangming Science and Technology Industrial Estate)
Postcode:315400
Tel: 0574-62700008
E-mail£ºzf@zhongfa-china.com
Reinforced ABS offers good mechanical properties, easy flow, heat resistance, fatigue resistance, good dimensional stability, good processibility.
Reinforced ABS could be used for axial fan blades, centrifuge fan blades, inertia fan bladesof air-conditiones, automobile parts, office-machine parts, skeletion of instrument panel, advertisement product, textile equipment parts, furniture parts, mechanical device parts,etc.
| Properties | Test Method | Unit | Glass Fiber Reinforced ABS | ||
| GR-10 | GR-20 | GR-30 | |||
| Density | D792 | g/cm3 | 1.1 | 1.20 | 1.28 |
| Tensile Strength | D638 | MPa | 80 | 90 | 102 |
| Tensile Elongation | D638 | % | 5 | 4 | 3 |
| Flexural Strength | D790 | MPa | 100 | 125 | 155 |
| Flexural Modulus | D790 | MPa | 3500 | 5000 | 7000 |
| Notched Charpy Impact Strength | D256 | KJ/m2 | 14 | 12 | 10 |
| Unnotched Charpy Impact Strength | KJ/m2 | 27 | 22 | 20 | |
| Hardness,Rockwell | HRR | ||||
| Heat Deflection Temperature 1.86MPa | D648 | ¡æ | 100 | 101 | 102 |
| Volume Resistivity | D257 | ¦¸.cm | 1014 | 1014 | 1014 |
| Molding Shrinkage | D955 | % | 0.4-0.6 | 0.3-0.5 | 0.2-0.4 |
| Note | GF10% | GF20% | GF30% | ||
The details given in this data sheet are our laboratory data but not specification guaranteed.
Glass fiber reinforced ABS processing conditions: injection temperature 200~225¡æ, mold temperature 40-80¡æ,injection pressure 60-90MPa, eliminate moisture at 80-85 ¡æ for 2-3 hours.